|
|
High Profile
"ALPHA" |
FEATURES |
ADVANTAGES |
|
 | DH-60 High Profile Spiral
Stretchwrapper. |
| Durastretch III three
roller Powered Pre-stretch System (20"
Spiral). |
| Semi-Automatic Controls
including START Button, automatic "turntable
home" positioning and separately
programmable top and bottom wrap timers. |
| Automatic Load Height
Sensing (Electric Eye). |
| Power-Thread automatic
film threading. |
| Automatic Film Cut-Off. |
|
| Wraps varying heights
with a 20" roll of film. |
| Film elevator
automatically determines the height of the
load. |
| Pre-stretch system
reduces the film usage as much as 72%! |
| 72" wrap height. |
| 4000# turntable capacity. |
| Separately programmable
top and bottom wrap timers. |
| Automatic "turntable
home". |
| Fork-truck portable. |
| Easy "push-button"
threading of film through rollers. |
| Automatic knife-free
cutting of film at the end of the wrap
cycle. |
|
|
$14,614 |
For
additional options see "D" Series Options
below. |
PRESTRETCH OPTIONS
CONTROL OPTIONS
CAPACITY OPTIONS
ADDITIONAL OPTIONS
| Name |
Description |
Price |
|
DH-60 |
 High
Profile Spiral featuring Manual Controls,
electromechanical film brake or Durastretch I
Pre-stretch. |
$8,744 |
|
DL-60 |
 Low
Profile Spiral featuring Manual Controls,
electromechanical film brake or Durastretch I
Pre-stretch (Ramp additional). |
$9,244 |
|
DHF-60 |
 High
Profile Full-web with Manual Controls,
electromechanical film brake. |
$7,369 |
|
DLF-60 |
 Low
Profile Full-web with Manual Controls,
electromechanical film brake (Ramp additional). |
$7,994 |
| DHT |
 High
Profile Turntable ONLY, foot-pedal
activated. Upgradable. |
$6,119 |
|
DLT |
 Low
Profile Turntable ONLY, foot pedal
activated. Upgradable. |
$6,744 |
(BEFORE ANY OPTIONS - BELOW - ARE ADDED)
| Item # |
Description |
Price |
| 1 |
Durastretch III (three
roller) Powered Pre-stretch System
20" Spiral
30" Spiral |
$2,375
$3,500 |
| 2a |
Durastretch II two roller
Powered Pre-stretch System (20") |
$1,625 |
| 2b |
Durastretch II two roller
Powered Pre-stretch System (30") |
$2,750 |
| 2c |
Durastretch II two roller
Powered Pre-stretch System (60") |
$3,750 |
| 2d |
Durastretch II two roller
Powered Pre-stretch System (70") |
$4,375 |
| 3a |
Durastretch I two roller
Non-powered Pre-stretch System
60" Full Web |
$2,500 |
| 3b |
Adjustable load-holding "Film
Tension" control for spiral machines equipped
with Durastretch I Non-Powered Pre-Stretch (also
requires Semi-Automatic controls, item #7) |
$869 |
| 4 |
POWER-THREAD Automatic film
threading for Durastretch II and III |
$500 |
| 5a |
Automatic Film Cut-Off for
Spiral Machines without Variable Speed
Turntable. Only available on
Powered-Pre-stretch Systems. |
$938 |
| 5b |
Automatic Film Cut-Off for
Spiral Machines with Variable Speed
Turntable. Only available on
Powered-Pre-stretch Systems. |
$619 |
| 5c |
Automatic Film Cut-Off for
Full-web machines without Variable Speed
Turntable. Only available on
Powered-Pre-stretch Systems. |
$1,244 |
| 5d |
Automatic Film Cut-Off for
Full-web machines with Variable Speed
Turntable. Only available on
Powered-Pre-stretch Systems. |
$869 |
| 6 |
Operator adjustable stretch
level - Durastretch III |
$1,244 |
| Item # |
Description |
Price |
| 7 |
Semi-Automatic Programmable
Controls. |
|
| 7a |
Spiral - Includes
START button, automatic "turntable home"
positioning and separately programmable top and
bottom wrap timers. Also includes 72" wrap
height and 4000# turntable capacity upgrades. |
$813 |
| 7b |
Full-Web - Includes
START button, automatic "turntable home"
positioning, programmable revolution timer. |
$438 |
| 8 |
"Turntable Jog" switch. |
$250 |
| 9 |
"Cycle Pause" control. |
$313 |
| 10 |
Automatic Load Height Sensing
(Electric Eye). |
$938 |
| 11 |
"Soft Start" Gradual
Acceleration 9 R.P.M. Turntable (for unstable
loads or low voltage locations). |
$494 |
| 12 |
Variable Speed Turntable (1
to 12 rpm w/gradual acceleration/deceleration,
includes "Soft-Start"). Included in power
converyorized turntable options. |
$869 |
| Item # |
Description |
"D" Series Price |
"E" Series Price |
| 13a |
Additional Wrap Height per
12" (60" standard on manual control machines,
72" on semi-automatic spiral machines) |
$313 |
$939 (110") |
| 13b |
Bolt-on Mast for Additional
Height, above (if required). |
$500 |
|
| 14 |
Base Frame Extension per 12" |
$438 |
|
| 15 |
4,000 pound turntable
capacity. Manual controls only - standard on
semi-automatic machines. |
$813 |
|
| 16 |
6,000 pound turntable
capacity - high profile |
$1,500 |
|
| 17 |
6,000 pound turntable
capacity - low profile |
$2,000 |
$2,000 (5,500#)
$3,000 (6,600#)
|
| 18 |
10,000 pound turntable
capacity - high profile |
$2,500 |
|
| 19 |
20" Ring-gear turntable
drive, includes 10,000 pound turntable capacity
- high profile |
$8,125 |
|
| 20 |
Low Profile 72"
diameter turntable upgrade |
$2,875 |
2,875 (70")
3,740 (78")
|
| 21 |
High Profile 60"
octagonal turntable |
$1,244 |
|
| 22a |
Second Turntable for High
Profile with semi-automatic controls for DUAL
TURNTABLE configuration |
$5,000 |
|
| 22b |
Second Turntable for Low
Profile with semi-automatic controls for DUAL
TURNTABLE configuration |
$5,625 |
|
| Item # |
Description |
"D" Series Price |
"E" Series Price |
| 23a |
Low Profile
Entry/Exit Ramp (4' X 4' contoured) |
$813 |
$813 |
| 23b |
Low Profile
Entry/Exit Ramp (5' or 6' wide x 4' long, or 4'
wide x 5' long, contoured) |
$938 |
|
| 24 |
Dual-Roll
Full-Web, electromechanical film brake |
$2,250 |
|
| 25 |
Netting Option
Upgrade (Electromechanical Brake for net rolls
to 16" diameter) |
$500 |
|
| 26 |
Remote lube,
low profile turntable cam-rollers (for cold,
wet or corrosive environments) |
$625 |
|
| 27 |
Split frame (for
installing high profile turntable on
scale) |
$744 |
|
| 28a |
Top Platen
(pneumatic - 36" stroke, adjustable for 15" to
60" tall loads). |
$4,375 |
$4,375 |
| 28b |
Top Platen
(electric - holds 15" to 60" tall loads - manual
controls). |
$5,625 |
$5,625 |
| 28c |
Semi-Automatic
control (E. E.) for Electric Top Platen. |
$938 |
|
| 29 |
220 volt 3 phase,
208 volt 1 phase, or 50 cycle electrical service |
$619 |
|
| 30 |
440 volt 3 phase |
$1,119 |
|
| 31 |
220 volt 1 phase
electrical service |
$494 |
|
| 32 |
Spiral mast, film
elevator and manual controls for upgrading a DHT
or a DLT turntable to a manual DH-60 or a DL-60 |
$3,494 |
|
| 33 |
Full web mast,
film holder and manual controls for upgrading a
DHT or a DLT to a manual DHF-60 or DLF-60 |
$1,869 |
|
| 34 |
Conveyor |
See Below |
|
NOTE: These machines plug into a
standard wall outlet. "D" series machines use 15
amps of 120v 1 phase electrical service. "E" series
machines use 12.5 amps. A separate circuit may need
to be run if a customer's existing wiring is not
sufficient.
Durapak manufactures many "custom"
options, too numerous to list. Please call for
pricing.
Pricing and specifications subject
to change without notice.
OVERHEAD SPIRAL STRETCHWRAPPING EQUIPMENT
(BEFORE ANY OPTIONS - BELOW - ARE ADDED)
RA-80 Overhead spiral wrapper,
wall or beam mountable, with semi-automatic
controls and compensating electromechanical film
brake |
$19,994 |
| 1 |
Automatic Load
Height Sensing (Electric Eye) |
$938 |
| 2 |
Durastretch II
two-roller Powered pre-stretch system |
$1,625 |
| 3 |
POWER-THREAD
Automatic film threading for Durastretch II |
$500 |
| 4 |
Automatic Film
Cut-Off. |
$619 |
| 5 |
"Dead-Man"
automatic high-speed emergency stop (very highly
recommended) |
$1,500 |
| 6 |
Additional Wrap
Height for each 12" (double this pricing on
free-standing units) |
$619 |
| 7 |
Additional (3rd)
support leg to convert RA-80 wall-mount machine
into a free-standing unit |
$1,250 |
| 8 |
Additional brace,
similar to the existing wall-side brace, to
convert the RA-80 into a free-standing unit |
$3,750 |
| 9 |
Additional
structure to convert the RA-80 into a fully
enclosed wrapper with electric eyes guarding the
entrances |
$6,875 |
| 10 |
220 volt 3 phase,
208 volt 1 phase or 50 cycle electrical service. |
$619 |
| 11 |
440 volt 3 phase
electrical service. |
$1,119 |
| 12 |
220 volt 1 phase
electrical service. |
$494 |
| 13 |
Conveyor. |
See Below |
NOTE: This machine uses 15 amps of
120v 1 phase service. A separate circuit may need to
be run if a customer's existing wiring is not
sufficient.
Durapak manufactures many "custom"
options, too numerous to list. Please call for
pricing.
Pricing subject to change without
notice.
High profile and RA-80 Overhead
stretchwrappers can accommodate any configuration of
conveyor. Low profile stretchwrappers can only
accommodate gravity conveyor because their design
does not allow for commutator rings for supplying
power to the turntable.
Durapak manufactures our own
conveyor. Turntable conveyor ends are rounded to the
diameter of the turntable, as are infeed and exit
sections, to insure troublefree load transferring.
Durapak's gravity conveyor is
manufactured with 2 7/8" rollers on 3" nominal
centers. Bearings are removable. Turntable conveyor
features a full-length roller-snub brake, lever
operated. Legs are adjustable on individual
free-standing sections.
Durapak manufactures two different
powered conveyor configurations. Both are
Pillow-block bearing construction. Conveyor speed is
adjustable from 25 to 50 fpm, featuring gradual
acceleration and dynamic braking.
Forward/reverse controls are added
to the machine console. Legs are adjustable on
individual free-standing sections. A power conveyor
equipped stretchwrapper requires 220v. electrical
service, minimum.
A variable speed turntable is
included when a power conveyorized turntable is
ordered. It remains an option if a gravity turntable
is ordered.
Power conveyor option #1: 2 7/8"
rollers on 3" centers, every roller power driven
(except transition rollers.)
Power conveyor option #2: 3 3/8"
rollers on 4 1/2" centers, every roller power driven
(except transition rollers.)
| Description |
Price |
| GRAVITY TURNTABLE CONVEYOR -
60" Diameter for High Profile
(42"W x 48"L load overhangs conveyor slightly) |
$5,625 |
| GRAVITY TURNTABLE CONVEYOR
- 60" Diameter for Low Profile
(42"W x 48"L load overhangs conveyor slightly) |
$5,000 |
| GRAVITY TURNTABLE CONVEYOR
- 72" Diameter for High Profile
(48" x 48" maximum load size within conveyor) |
$6,875 |
| POWERED TURNTABLE CONVEYOR -
72" Diameter with manual controls for High
Profile, includes Variable Turntable
Speed and gradual acceleration/deceleration
(42"w x 48"l maximum load size) and a power ring
(as shown below) |
$ | |
